| Tools and Supplies to Remove Mold from Non-Porous Surfaces | ||||
|---|---|---|---|---|
| 1 | Mold remediation mask | |||
| 2 | Safety goggles | |||
| 3 | Disposable gloves | |||
| 4 | Scrub brush | |||
| 5 | HEPA vacuum cleaner | |||
| 6 | Bucket | |||
| 7 | Cleaning solution (bleach or hydrogen peroxide) | |||
| 8 | Microfiber cloths | |||
| 9 | Plastic sheeting | |||
| 10 | Tape (to secure the plastic sheeting) | |||
Mold is a common problem in homes and buildings, especially in areas with high humidity or moisture. Non-porous surfaces like tiles, glass, and metal are less likely to develop mold compared to porous surfaces, but they are not completely immune to it. If you notice mold growing on non-porous surfaces in your home, it’s important to act quickly and remove it before it spreads. Here’s a step-by-step guide on how to remove mold from non-porous surfaces:
Step 1: Wear protective gear
Before you start cleaning the mold, make sure to wear protective gear to avoid exposure to mold spores. Wear gloves, goggles, and a mask to protect your skin, eyes, and respiratory system.
Step 2: Prepare a cleaning solution
Mix a cleaning solution using one part bleach and four parts water. You can also use a commercial mold remover that is specifically designed for non-porous surfaces. Follow the instructions on the label for the correct dilution ratio.
Step 3: Apply the cleaning solution
Apply the cleaning solution to the moldy area using a spray bottle or a cloth. Make sure to cover the entire affected area and let the solution sit for at least 15 minutes. This will give the solution enough time to penetrate the mold and kill it.
Step 4: Scrub the surface
After the cleaning solution has soaked into the mold, use a scrub brush or a sponge to scrub the surface. Apply firm pressure and scrub in a circular motion to remove the mold. Be careful not to damage the surface while scrubbing.
Step 5: Rinse the surface
Once you have scrubbed the surface, rinse it thoroughly with clean water. Use a clean cloth or a sponge to wipe away any remaining mold or cleaning solution.
Step 6: Dry the surface
After rinsing the surface, dry it thoroughly using a clean towel or a fan. Make sure to remove all moisture from the surface, as mold thrives in damp environments.
Step 7: Dispose of cleaning materials
Dispose of any cleaning materials, including gloves, masks, and cloths, in a sealed plastic bag. This will prevent mold spores from spreading to other areas of your home.
In conclusion, removing mold from non-porous surfaces is a relatively simple process that can be done with common household cleaning products. However, if you have a large mold problem or if the mold has spread to porous surfaces like drywall or carpet, it’s best to call a professional mold remediation company to handle the problem.